Teckwrap Sublimation Paper 100 sheets

Press temps and times for textiles 
Polyester fabric
200 to 205 °C
35 to 40 seconds
Medium pressure
Pre-press the shirt for 5 to 10 seconds before the actual printing of the sublimation design to eliminate moisture.
Ceramic sublimation mugs
190 to 200 °C
20 seconds
Medium to firm pressure
After pressing, do not remove the mug on the mug press machine. Let it cool and stay for one minute.
Ceramic sublimation plate
190 to 200 °C
60 seconds
Medium pressure
Make sure to remove plastic coating before pressing the design.
Sublimation tumbler (made of metal)
160 to 170 °C
25 seconds
Medium to firm pressure
Always use a thermal tape especially when printing on curved surfaces of the tumbler.
Sublimation umbrella
190 to 195 °C
45 seconds
Medium pressure
Make sure that the rib and rib tip of the umbrella does not come in contact with the heat as it is made of plastic and may melt.
Neoprene fabric (mouse pads, coasters, vapor foam kit)
200 to 205 °C
40 seconds
Medium pressure
Make sure to totally clean the heat press machine before printing. Any dirt or dust may leave unwanted print marks on the neoprene fabric.
Sublimation metals (Mobile phone covers, keyring, metal plates, trophy covers)
190 to 200 °C
60 seconds
Medium pressure
Place an absorbent sheet on the bottom of the heat press machine.
Sublimation substrate arm sleeves
200 to 205 °C
60 seconds
Medium pressure
Most arm sleeves are made of silk, polyester, nylon or a combination of these materials.
Sublimation face mask
240 to 245 °C
45 seconds
Medium pressure
Remove the inner cotton layer (if present) on the mask before pressing it.
Sublimation over heat transfer vinyl
175 to 180 °C
30 to 35 seconds
Medium pressure
Press the vinyl first on the fabric and let it cool before sublimating.
Canvas material
185 to 190 °C
40 seconds
Medium pressure
Pre-press the canvas material before sublimating the fabric.
Polyester cushion covers
200-205 °C
35 to 40 seconds
Medium pressure
When printing on polyester cushion covers, pre-press the fabric for 5 to 10 seconds just like pressing a shirt.